ULTEM 2200R PEI高刚度高强度-东莞市苏广塑胶原料有限公司

产品展厅

ULTEM 2200R PEI高刚度高强度

起订量 (千克)价格

25-100￥99.99 /千克

≥100￥99 /千克

产品详请

ULTEM 2200R PEI高刚度高强度

产品描述：

20% 玻璃纤维填充，标准流动聚醚酰亚胺 (Tg 217C)，内部脱模。符合 ECO 标准，符合 UL94 V0 和 5VA 标准。

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus 3	999000	psi	ASTM D638
Tensile Strength 4 (Break)	19000	psi	ASTM D638
Tensile Elongation 4 (Break)	4.0	%	ASTM D638
Flexural Modulus 5 (3.94 in Span)	999000	psi	ASTM D790
Flexural Strength 5 (Break, 3.94 in Span)	32900	psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F)	1.7	ft·lb/in	ASTM D256
Unnotched Izod Impact (73°F)	9.0	ft·lb/in	ASTM D4812
Reverse Notch Izod Impact (0.126 in)	9.6	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed, 0.252 in	410	°F
264 psi, Unannealed, 0.252 in	410	°F
Vicat Softening Temperature	428	°F	ASTM D1525 6
CLTE - Flow (-4 to 302°F)	1.2E-5	in/in/°F	ASTM E831
RTI Elec	338	°F	UL 746B
RTI Imp	338	°F	UL 746B
RTI Str	338	°F	UL 746B

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	7.0E+16	ohms·cm	ASTM D257
Dielectric Strength (0.0630 in, in Oil)	670	V/mil	ASTM D149
Dielectric Constant (1 kHz)	3.50		ASTM D150
Dissipation Factor			ASTM D150
1 kHz	1.5E-3
2.45 GHz	4.9E-3
Arc Resistance 7	PLC 6		ASTM D495
Comparative Tracking Index (CTI)	PLC 4		UL 746A
High Amp Arc Ignition (HAI)			UL 746A
> 0.06 in	PLC 3
> 0.12 in	PLC 4
High Voltage Arc Resistance to Ignition (HVAR)	PLC 2		UL 746A
Hot-wire Ignition (HWI)			UL 746A
> 0.06 in	PLC 2
> 0.12 in	PLC 1
Flammability	Nominal Value	Unit	Test Method
Flame Rating (> 0.015 in)	V-0		UL 94
Oxygen Index	50	%	ASTM D2863
NBS Smoke Density - Flaming, Ds 8	1.30		ASTM E662