PA66阻燃 Zytel FR50 BK153J

Density	1.57	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.70	--	%
Flow	0.30	--	%
Water Absorption (Equilibrium, 73°F, 0.0787 in, 50% RH)	1.3	--	%	ISO 62
Viscosity Number (Reduced Viscosity) 2	150.0	--	ml/g	ISO 1628
Viscosity Number 3 (96% H2SO4 (Sulphuric Acid))	150	--	cm3/g	ISO 307

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	1.51E+6	--	psi	ISO 527-1
Tensile Stress (Break)	21000	--	psi	ISO 527-2
Tensile Strain (Break)	2.6	--	%	ISO 527-2
Flexural Modulus	1.33E+6	--	psi	ISO 178
Flexural Stress	34800	--	psi	ISO 178
Poisson's Ratio	0.34	--
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)	4.5	--	ft·lb/in2	ISO 179/1eA
Notched Izod Impact Strength (73°F)	5.1	--	ft·lb/in2	ISO 180/1A

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	466	--	°F	ISO 75-2/A
Glass Transition Temperature 4	176	68.0	°F	ISO 11357-2
Melting Temperature 5	500	--	°F	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Comparative Tracking Index	275	--	V	IEC 60112
High Amp Arc Ignition (HAI)				UL 746A
0.0295 in	166	--
0.0591 in	171	--
0.118 in	187	--
Hot-wire Ignition (HWI)				UL 746A
0.0295 in	300	--	sec
0.0591 in	300	--	sec
0.118 in	300	--	sec
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94, IEC 60695-11-10, -20
0.014 in	V-0	--
0.06 in	V-0 5VA	--
FMVSS Flammability	DNI	--		FMVSS 302

Fill Analysis	Dry	Conditioned	Unit
Ejection Temperature	410	--	°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Suggested Max Moisture	< 0.20	%
Processing (Melt) Temp	536 to 572	°F
Melt Temperature, Optimum	554	°F
Mold Temperature	158 to 248	°F
Mold Temperature, Optimum	212	°F
Holding Pressure	7250 to 14500	psi
Drying Recommended	yes
Hold Pressure Time	3.00	s/mm
Maximum Screw Tangential Speed	472	in/min