耐冷水PPS Torelina A504 CX1

(1)PPS塑胶原料它是一种综合性能优异的热塑性特种工程塑料,其突出的特点是耐高温、耐腐蚀和优越的机械性能。PPS市含硫芳香族聚合物,线型PPS在350以上交联后成热固性塑料,支链型结构PPS为塑料性塑料。
(2)PPs的应用是以其优异的耐热性为。兼顾它的减摩自润滑性、尺寸稳定性,阻燃性和电绝缘性等在化工行业PPS可用作合成、传送、储存物料的反应罐、管道、阀门。在机械PPS可制作叶轮、叶片、齿轮、偏心轮、轴承、离合器及耐磨零件。PPs的主要用途还是在电子电器领域,如制作变压器骨架高频线圈骨架、插头、插座、接线架、接触器转鼓鼓片及各种精密零件等。

耐冷水40%PPS Torelina A504CX1

Density (23°C)
1.66
g/cm3
ISO 1183
Molding Shrinkage 2
Internal Method
Across Flow : 3.00 mm
0.80
%
Flow : 3.00 mm
0.20
%
Water Absorption (24 hr, 23°C)
0.020
%
ISO 62
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
122
ISO 2039-2
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (23°C)
200
MPa
ISO 527-2
Tensile Strain (Break, 23°C)
1.8
%
ISO 527-2
Flexural Modulus (23°C)
15000
MPa
ISO 178
Flexural Stress (23°C)
300
MPa
ISO 178
Shear Strength (23°C)
75.0
MPa
JIS K7214
Taber Abrasion Resistance (1000 Cycles)
50.0
mg
ISO 9352
Coefficient of Friction - vs. Metal
0.25
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (23°C)
12
kJ/m2
ISO 179
Charpy Unnotched Impact Strength (23°C)
55
kJ/m2
ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)
260
°C
ISO 75-2/A
Melting Temperature
278
°C
ISO 11357-3
CLTE
ISO 11359-2
Flow
2.3E-5
cm/cm/°C
Transverse
3.1E-5
cm/cm/°C
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
1.0E+14
ohms·cm
IEC 60093
Electric Strength
24
kV/mm
IEC 60243-1
Dielectric Constant (23°C, 1 MHz)
4.20
IEC 60250
Dissipation Factor (23°C, 1 MHz)
2.0E-3
IEC 60250
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.28 mm)
V-0
UL 94

密度(73°F)	1.52	克/立方厘米	ISO 1183
螺旋流3	5.91	在	内部方法
成型收缩率4			内部方法
Across Flow : 0.118 in	0.85	%
Flow : 0.118 in	0.20	%
Water Absorption 5 (24 hr, 73°F)	0.020	%	ISO 62
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	114		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (73°F)	21800	psi	ISO 527-2
Tensile Strain (Break, 73°F)	2.5	%	ISO 527-2
Flexural Modulus (73°F)	1.45E+6	psi	ISO 178
Flexural Stress (73°F)	32600	psi	ISO 178
Shear Strength (73°F)	9860	psi	JIS K7214
Taber Abrasion Resistance (1000 Cycles)	50.0	mg	ISO 9352
Coefficient of Friction - vs. Metal	0.25
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)	6.7	ft·lb/in2	ISO 179
Charpy Unnotched Impact Strength (73°F)	29	ft·lb/in2	ISO 179

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	491	°F	ISO 75-2/A
Melting Temperature	532	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.2E-5	in/in/°F
Transverse	1.8E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+16	ohms·cm	IEC 60093
Electric Strength	660	V/mil	IEC 60243-1
Dielectric Constant (73°F, 1 MHz)	3.80		IEC 60250
Dissipation Factor (73°F, 1 MHz)	2.0E-3		IEC 60250
Flammability	Nominal Value	Unit	Test Method
Flame Rating (0.06 in)	V-0		UL 94