Ryton QA200P PPS着色性-东莞市苏广塑胶原料有限公司

产品展厅

Ryton QA200P PPS着色性

起订量 (千克)价格

25-100￥56.66 /千克

≥100￥55 /千克

品牌：菲利普（苏威）

货号：01

发布日期： 2024-05-18
更新日期： 2025-08-02

发送咨询信息

产品详请

品牌	菲利普（苏威）
货号	01
用途	汽车领域的应用工程配件电气/电子应用领域
牌号	QA200P
型号	QA200P
品名	PPS
外形尺寸	颗粒 25KG包
生产企业	索尔维特种聚合物
是否进口	是

Ryton QA200P PPS着色性

Ryton聚对苯硫醚(PPS)是由硫原子和亚苯基环以对位替换模式形成的聚合物。其分子结构中含有高度稳定的化学键,使其对热降解和化学反应均具有很高的分子稳定性。同时,该聚合物的分子结构也易于形成一个具有热稳定性的晶体点阵,因此,PPS 是一种结晶熔点高达285°C(545°F)左右的半晶状聚合物。由于其分子结构所呈现的特点,PPS 在燃烧中往往会形成炭质残渣,使材料具有与生俱来的阻燃性能。尚未发现 PPS在低于 200°C(392°F)左右的温度下,溶于任何溶剂。

PPS性能
1、电绝缘性(尤其高频绝缘性)优良,白色硬而脆，跌落于地上有金属响声,透光率仅次于有机玻璃,着色性耐水性,化学稳定性良好。有优良的阻燃性，为不燃塑料。

2、强度一般，刚性很好,但质脆,易产生应力脆裂,不耐苯.汽油等有机溶剂.长期使用温度可达260度，在400度的空气或氮气中保持稳定。通过加玻璃纤维或其它增强材料改性后，可以使冲击强度大为提高，耐热性和其它机械性能也有所提高，密度增加到1.6-1.9，成型收缩率较小到0.15-0.25％适于制作耐热件.绝缘件及化学仪器.光学仪器等零件.成型性能1.无定形料,吸湿小,但宜干燥后成型。2.流动性介于ABS和PC之间，凝固快，收缩小，易分解，选用较高的注射压力和注射速度。模温取100-150度。主流道锥度应大，流道应短。
PPS应用：
电子电气：微型电子元件封装、连接器、接线器、插座、线圈骨架、微调电容器，保险器基座。
机械仪表：泵壳、泵轮、瓦、齿轮、滑轮、万向头、密封垫，法兰盘、计数器、水准仪、流量计部件。
汽车领域：温度传感器、汽化器、进化器、汽化泵、坐椅基座，水箱水室。
Ryton QA200P 物性表

Ryton® R-7-120BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-120NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color

Injection ? Molding

Ryton® R-7-121BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color

Injection ? Molding

Ryton® R-7-121NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color

Injection ? Molding

Ryton® R-7-150BL

Ryton® R-7-190BL

Ryton® R-7-190NA

Ryton® R-7-220BL

Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-232BL

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® R-7-232NA

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® V-1

Low viscosity ? PPS polymer for coatings and compression molding

Coating;?Compounding;?Extrusion;?Extrusion ? Coating

Ryton® XE3500BL

Ryton® XE4050BL

Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color

Ryton® XE4500BL

Ryton® XE5030BL

30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color

Ryton® XE5430BL

Ryton® XE5430NA

Ryton® XE5500BL

Ryton® XE5515BL

15% glass filled ? PPS allow for blow molding and extrusion processes; black color

Blow Molding;?Extrusion

Ryton® XK2340

40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color

Injection ? Molding

Ryton® R-7-120BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-120NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color	Injection ? Molding
Ryton® R-7-121BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color	Injection ? Molding
Ryton® R-7-121NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color	Injection ? Molding
Ryton® R-7-150BL
Ryton® R-7-190BL
Ryton® R-7-190NA
Ryton® R-7-220BL	Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-232BL	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® R-7-232NA	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® V-1	Low viscosity ? PPS polymer for coatings and compression molding	Coating;?Compounding;?Extrusion;?Extrusion ? Coating
Ryton® XE3500BL
Ryton® XE4050BL	Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color
Ryton® XE4500BL
Ryton® XE5030BL	30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color
Ryton® XE5430BL
Ryton® XE5430NA
Ryton® XE5500BL
Ryton® XE5515BL	15% glass filled ? PPS allow for blow molding and extrusion processes; black color	Blow Molding;?Extrusion
Ryton® XK2340	40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color	Injection ? Molding