Ryton QC230N PPS热塑性-东莞市苏广塑胶原料有限公司

产品展厅

Ryton QC230N PPS热塑性

起订量 (千克)价格

25-100￥56.66 /千克

≥100￥55 /千克

品牌：菲利普（苏威）

货号：01

发布日期： 2024-05-18
更新日期： 2025-06-19

发送咨询信息

产品详请

品牌	菲利普（苏威）
货号	01
用途	汽车领域的应用工程配件电气/电子应用领域
牌号	QC230N
型号	QC230N
品名	PPS
外形尺寸	颗粒 25KG包
生产企业	索尔维特种聚合物
是否进口	是

Ryton QC230N PPS热塑性

聚苯硫醚,全称为聚亚苯基硫醚,英文名称为Polyphenylene sulfide,简称PPS。它是一种综合性能优异的热塑性特种工程塑料,其突出的特点是耐高温,耐腐蚀和优越的机械性能,PPS是含硫芳香族聚合物,线型PPS在350℃以上交联后成热固性塑料,支链型结构PPS为热塑性塑料。

PPS Ryton QC230N加工方法;加工特性:树脂厂商提供的PPS为一种相对质量比较低(4000~5000)、结晶度较高(75%)的白色粉末，这种纯PPS无法直接塑化成型，只能用于喷涂。用于塑化成型的PPS，必须进行交联改性处理，使熔体的粘度上升。一般交联后的熔融指数达到10~20为宜;进行玻璃纤维增强PPS的熔融指数可大一些，但不能大于200。PPS的交联方法有热交联和化学交联两种，以热交联为主。热交联的交联温度为150~350℃，**150℃不发生交联，**350℃发生高度交联，反而导致加工困难。化学交联需要加入交联促进剂，具体的品种有氧化锌、氧化铅、氧化镁、氧化钴等以及类化合物，六甲氧基三聚氰酰胺、、碱金属或碱土金属的次氯酸盐等。PPS虽有交联，但流动性下降不多;因此，废料可重复使用三次;PPS本身具有脱模性，可不必加入脱模剂;PPS经过热处理可提高结晶度及热变形温度，后处理的条件为:温度204℃，时间30min。

PPS应用范围:
电子方面:电视机、电脑上的高压元件、外壳、插座、接线柱，电动机的起动线圈、叶片，电刷托架及转子绝缘部件接触开关，继电器，电熨斗，吹风机，灯头，暖风机，F级薄膜等。汽车工业:适用于排气再循环阀及水泵叶轮，及汽化器、排气装置、排气调节阀、灯光反射器、轴承、传感部件等。机械工业:用作轴承、泵、阀门、活塞、精密齿轮、以及复印机、照相机、计算机零部件，导管、喷雾器、喷油嘴、仪器仪表零件等。
化工领域:用于制作耐酸碱的阀门管道、管件、阀门、垫片及潜水泵或叶轮等耐腐蚀零部件。

Ryton® R-7-120BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-120NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color

Injection ? Molding

Ryton® R-7-121BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color

Injection ? Molding

Ryton® R-7-121NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color

Injection ? Molding

Ryton® R-7-150BL

Ryton® R-7-190BL

Ryton® R-7-190NA

Ryton® R-7-220BL

Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-232BL

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® R-7-232NA

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® V-1

Low viscosity ? PPS polymer for coatings and compression molding

Coating;?Compounding;?Extrusion;?Extrusion ? Coating

Ryton® XE3500BL

Ryton® XE4050BL

Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color

Ryton® XE4500BL

Ryton® XE5030BL

30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color

Ryton® XE5430BL

Ryton® XE5430NA

Ryton® XE5500BL

Ryton® XE5515BL

15% glass filled ? PPS allow for blow molding and extrusion processes; black color

Blow Molding;?Extrusion

Ryton® XK2340

40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color

Injection ? Molding

Ryton® R-7-120BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-120NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color	Injection ? Molding
Ryton® R-7-121BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color	Injection ? Molding
Ryton® R-7-121NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color	Injection ? Molding
Ryton® R-7-150BL
Ryton® R-7-190BL
Ryton® R-7-190NA
Ryton® R-7-220BL	Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-232BL	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® R-7-232NA	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® V-1	Low viscosity ? PPS polymer for coatings and compression molding	Coating;?Compounding;?Extrusion;?Extrusion ? Coating
Ryton® XE3500BL
Ryton® XE4050BL	Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color
Ryton® XE4500BL
Ryton® XE5030BL	30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color
Ryton® XE5430BL
Ryton® XE5430NA
Ryton® XE5500BL
Ryton® XE5515BL	15% glass filled ? PPS allow for blow molding and extrusion processes; black color	Blow Molding;?Extrusion
Ryton® XK2340	40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color	Injection ? Molding