耐热性PPS Ryton R-7-120NA-东莞市苏广塑胶原料有限公司

产品展厅

耐热性PPS Ryton R-7-120NA

起订量 (千克)价格

25-100￥56.66 /千克

≥100￥55 /千克

品牌：菲利普（苏威）

货号：01

发布日期： 2024-05-18
更新日期： 2025-06-19

发送咨询信息

产品详请

品牌	菲利普（苏威）
货号	01
用途	汽车领域的应用工程配件电气/电子应用领域
牌号	R-7-120NA
型号	R-7-120NA
品名	PPS
外形尺寸	颗粒 25KG包
生产企业	索尔维特种聚合物
是否进口	是

耐热性PPS Ryton R-7-120NA

PPS特性:-股性能:PPS为一种外观白色、高结晶度、硬而脆的聚合物,纯PPS的相对密度为1.3,但改性后会增大。PPS有吸水率极小,一般只有0.03%左右。PPS的阻燃性好,其氧指数高达44%以上;与其他塑料相比,它在塑料中属于高阻燃材料(纯PVC的氧指数为47%、PSF为30%、PA66为29%、MPPO为28%,PC为25%)。1.超高耐热性能:热变形温度超过260℃,是目前使用温度*的热塑性工程塑料之一,长期使用温度为220-240℃,短时可达260°C;
2.耐化学性能优异:目前尚未发现可在200℃以下溶解PPS的溶剂,对无机酸、碱和盐抵抗性极高;3.电气性能:在高温、高湿、高频率的环境中,具有很高的体积电阻率、表面电阻率、击穿电压,低的介电常数及介电损耗角正切,是优良的绝缘材料。经改性处理,也能制成具良好导电性能的高强材料;4.力学性能:刚性极强,表面硬度高,并具有优异的耐蠕变性和耐疲劳性;5.耐辐射性:耐辐射达到Gy 1x108,是其它工程塑料无法比拟的新材料,在电子、电气、机械、仪器,是作为耐辐射“理想的优良材料;
6.成型性:收缩率小,尺寸稳定性好,不易变形;
7.防火阻燃性:纯PPS在厚度为0.8mm时便可通过UL-94V0级。基本上,除了少数等级如超韧系列之外,各种等级PPS的UL94燃烧性都是属于V-0级,在UL94燃烧性中已是的等级了。超韧系列PPS含有一些增韧剂,会牺牲一些耐燃性,

1、机械工业:机械工业中特别运用于在高湿、强腐蚀的环境下的部件制备。用于壳体、结构件、耐磨件及密封材料，具体有如:泵壳、泵轮阀、轴承、轴承支架、活塞环及齿轮、滑轮、风扇、流量计部件、法兰盘、万向头、计数器、水准仪等。电子电器:微型电子元件封装、连接器、接线器、插座、线骨架、马达壳、电磁调节盘、电视高频头轴、继电器、微调电容器、保险丝支2架、收录机、磁疗器等零部件。还应用于精密仪器:电脑、计时器、转速器、复印机、照相机、温度传感器以及各种测量仪表的壳体和部件。

Ryton® R-7-120BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-120NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color

Injection ? Molding

Ryton® R-7-121BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color

Injection ? Molding

Ryton® R-7-121NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color

Injection ? Molding

Ryton® R-7-150BL

Ryton® R-7-190BL

Ryton® R-7-190NA

Ryton® R-7-220BL

Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-232BL

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® R-7-232NA

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® V-1

Low viscosity ? PPS polymer for coatings and compression molding

Coating;?Compounding;?Extrusion;?Extrusion ? Coating

Ryton® XE3500BL

Ryton® XE4050BL

Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color

Ryton® XE4500BL

Ryton® XE5030BL

30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color

Ryton® XE5430BL

Ryton® XE5430NA

Ryton® XE5500BL

Ryton® XE5515BL

15% glass filled ? PPS allow for blow molding and extrusion processes; black color

Blow Molding;?Extrusion

Ryton® XK2340

40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color

Injection ? Molding

Ryton® R-7-120BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-120NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color	Injection ? Molding
Ryton® R-7-121BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color	Injection ? Molding
Ryton® R-7-121NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color	Injection ? Molding
Ryton® R-7-150BL
Ryton® R-7-190BL
Ryton® R-7-190NA
Ryton® R-7-220BL	Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-232BL	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® R-7-232NA	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® V-1	Low viscosity ? PPS polymer for coatings and compression molding	Coating;?Compounding;?Extrusion;?Extrusion ? Coating
Ryton® XE3500BL
Ryton® XE4050BL	Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color
Ryton® XE4500BL
Ryton® XE5030BL	30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color
Ryton® XE5430BL
Ryton® XE5430NA
Ryton® XE5500BL
Ryton® XE5515BL	15% glass filled ? PPS allow for blow molding and extrusion processes; black color	Blow Molding;?Extrusion
Ryton® XK2340	40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color	Injection ? Molding