注塑PPS Ryton R-7-121NA-东莞市苏广塑胶原料有限公司

产品展厅

注塑PPS Ryton R-7-121NA

起订量 (千克)价格

25-100￥56.66 /千克

≥100￥55 /千克

品牌：菲利普（苏威）

货号：01

发布日期： 2024-05-18
更新日期： 2025-08-02

发送咨询信息

产品详请

品牌	菲利普（苏威）
货号	01
用途	汽车领域的应用工程配件电气/电子应用领域
牌号	R-7-121NA
型号	R-7-121NA
品名	PPS
外形尺寸	颗粒 25KG包
生产企业	索尔维特种聚合物
是否进口	是

注塑PPS Ryton R-7-121NA

PPS特性:-股性能:PPS为一种外观白色、高结晶度、硬而脆的聚合物,纯PPS的相对密度为1.3,但改性后会增大。PPS有吸水率极小,一般只有0.03%左右。PPS的阻燃性好,其氧指数高达44%以上;与其他塑料相比,它在塑料中属于高阻燃材料(纯PVC的氧指数为47%、PSF为30%、PA66为29%、MPPO为28%,PC为25%)。

加工方法(1)注塑:可采用通用注塑机，玻璃纤维增强聚苯硫醚的熔融指数以50为宜。注塑的工艺条件为:料筒温度，纯聚苯硫醚为280~330℃，40%GF聚苯硫醚为300 -350℃;喷嘴温度，纯聚苯硫醚为305℃，40%GF聚苯硫醚为330℃;
模县温度120-180°C:注塑压力，50-130MPA。(2)挤出:采用排气式挤出机，工艺为:加料段温度小于200℃;料筒温度300-340℃，连接体温度320-340℃，口
模温度300-320°℃。(3)模压成型:适合大型制品，采用两次压缩，先冷却，后热压。热压的预热温度纯聚苯硫醚为360℃左右15min,GF聚苯硫醚为380℃℃左右20min;模压压力为10~30Mpa，冷却到150℃C脱。(4)喷涂成型:采用悬浮喷涂法和悬浮喷涂与干粉热喷混合法，都是将聚苯硫醚喷涂到金属表面，再经过塑化、淬火处理而得到涂层:聚苯硫醚的涂层处理温度在300℃C以上，保温30min.

PPS 用途：

电子方面：视机、电脑上的高压元件、外壳、插座、接线柱，电动机的起动线圈、叶片，电刷托架及转子绝缘部件，接触开关，继电器，电熨斗，吹风机，灯头，暖风机，F级薄膜等。
汽车工业：适用于排气再循环阀及水泵叶轮，及汽化器、排气装置、排气调节阀、灯光反射器、轴承、传感部件等。
机械工业：用作轴承、泵、阀门、活塞、精密齿轮、以及复印机、照相机、计算机零部件，导管、喷雾器、喷油嘴、仪器仪表零件等。
化工领域：用于制作耐酸碱的阀门管道、管件、阀门、垫片及潜水泵或叶轮等耐腐蚀零部件。

1、机械工业:机械工业中特别运用于在高湿、强腐蚀的环境下的部件制备。用于壳体、结构件、耐磨件及密封材料，具体有如:泵壳、泵轮阀、轴承、轴承支架、活塞环及齿轮、滑轮、风扇、流量计部件、法兰盘、万向头、计数器、水准仪等。电子电器:微型电子元件封装、连接器、接线器、插座、线骨架、马达壳、电磁调节盘、电视高频头轴、继电器、微调电容器、保险丝支2架、收录机、磁疗器等零部件。还应用于精密仪器:电脑、计时器、转速器、复印机、照相机、温度传感器以及各种测量仪表的壳体和部件。
Ryton R-7-121NA 物性表

Ryton® R-7-120BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-120NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color

Injection ? Molding

Ryton® R-7-121BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color

Injection ? Molding

Ryton® R-7-121NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color

Injection ? Molding

Ryton® R-7-150BL

Ryton® R-7-190BL

Ryton® R-7-190NA

Ryton® R-7-220BL

Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-232BL

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® R-7-232NA

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® V-1

Low viscosity ? PPS polymer for coatings and compression molding

Coating;?Compounding;?Extrusion;?Extrusion ? Coating

Ryton® XE3500BL

Ryton® XE4050BL

Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color

Ryton® XE4500BL

Ryton® XE5030BL

30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color

Ryton® XE5430BL

Ryton® XE5430NA

Ryton® XE5500BL

Ryton® XE5515BL

15% glass filled ? PPS allow for blow molding and extrusion processes; black color

Blow Molding;?Extrusion

Ryton® XK2340

40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color

Injection ? Molding

Ryton® R-7-120BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-120NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color	Injection ? Molding
Ryton® R-7-121BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color	Injection ? Molding
Ryton® R-7-121NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color	Injection ? Molding
Ryton® R-7-150BL
Ryton® R-7-190BL
Ryton® R-7-190NA
Ryton® R-7-220BL	Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-232BL	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® R-7-232NA	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® V-1	Low viscosity ? PPS polymer for coatings and compression molding	Coating;?Compounding;?Extrusion;?Extrusion ? Coating
Ryton® XE3500BL
Ryton® XE4050BL	Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color
Ryton® XE4500BL
Ryton® XE5030BL	30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color
Ryton® XE5430BL
Ryton® XE5430NA
Ryton® XE5500BL
Ryton® XE5515BL	15% glass filled ? PPS allow for blow molding and extrusion processes; black color	Blow Molding;?Extrusion
Ryton® XK2340	40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color	Injection ? Molding