耐高温PPS Ryton R-7-190BL-东莞市苏广塑胶原料有限公司

产品展厅

耐高温PPS Ryton R-7-190BL

起订量 (千克)价格

25-100￥56.66 /千克

≥100￥55 /千克

品牌：菲利普（苏威）

货号：01

发布日期： 2024-05-19
更新日期： 2025-08-02

发送咨询信息

产品详请

品牌	菲利普（苏威）
货号	01
用途	汽车领域的应用工程配件电气/电子应用领域
牌号	R-7-190BL
型号	R-7-190BL
品名	PPS
外形尺寸	颗粒 25KG包
生产企业	索尔维特种聚合物
是否进口	是

耐高温PPS Ryton R-7-190BL

产品描述:
Ryton R-7-190BL 玻璃纤维和矿物填充的聚苯硫醚化合物使用传统成型设备提供增强的强度和低维护的成型。
聚苯硫醚,全称为聚亚苯基硫醚,英文名称为Polyphenylene sulfide,简称PPS。它是一种综合性能优异的热塑性特种工程塑料,其突出的特点是耐高温,耐腐蚀和优越的机械性能,PPS是含硫芳香族聚合物,线型PPS在350℃以上交联后成热固性塑料,支链型结构PPS为热塑性塑料。

PPS塑料,即聚苯硫醚英文,是一种新型高性能热塑性树脂,具有机械强度高、耐高温、耐化学药品性、难燃热稳定性好、电性能优良等优点。在电子、汽车、机械及化工领域均有广泛应用。PPS塑料具有机械强度高、耐高温、高阻燃、耐化学药品性能强等优点,具有硬而脆、结晶度高、难燃、热稳定性好、机械强度较高、电性能优良等优点。PPS是工程塑料中耐热性的品种之一,热变形温度一般大于260度、抗化学性仅次于聚四氟乙烯,流动性仅次于尼龙。此外,它还具有成型收缩率小(约0.8%),吸水率低(约0.02%),防火性好、而震动性好等优点。电绝缘性(尤其高频绝缘性)优良,白色硬而脆,跌落于地上有金属响声,透光率仅次于有机玻璃,着色性耐水性,化学稳定性良好。有优良的阻燃性,为不燃塑料。强度一般,刚性很好,但质脆,易产生应力脆裂,不耐苯,汽油等有机溶剂。长期使用温度可达260度,在400度的空气或氨气中保持稳定。通过加玻璃纤维或其它增强材料改性后,可以使冲击强度大为提高,耐热性和其它机械性能也有所提高,密度增加到1.6-1.9,成型收缩率较小到0.15-0.25%适于制作耐热件,绝缘件及化学仪器,光学仪器等

PPS 用途：

电子方面：视机、电脑上的高压元件、外壳、插座、接线柱，电动机的起动线圈、叶片，电刷托架及转子绝缘部件，接触开关，继电器，电熨斗，吹风机，灯头，暖风机，F级薄膜等。
汽车工业：适用于排气再循环阀及水泵叶轮，及汽化器、排气装置、排气调节阀、灯光反射器、轴承、传感部件等。
机械工业：用作轴承、泵、阀门、活塞、精密齿轮、以及复印机、照相机、计算机零部件，导管、喷雾器、喷油嘴、仪器仪表零件等。
化工领域：用于制作耐酸碱的阀门管道、管件、阀门、垫片及潜水泵或叶轮等耐腐蚀零部件。

Ryton® R-7-120BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-120NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color

Injection ? Molding

Ryton® R-7-121BL

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color

Injection ? Molding

Ryton® R-7-121NA

Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color

Injection ? Molding

Ryton® R-7-150BL

Ryton® R-7-190BL

Ryton® R-7-190NA

Ryton® R-7-220BL

Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color

Injection ? Molding

Ryton® R-7-232BL

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® R-7-232NA

Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved

Injection ? Molding

Ryton® V-1

Low viscosity ? PPS polymer for coatings and compression molding

Coating;?Compounding;?Extrusion;?Extrusion ? Coating

Ryton® XE3500BL

Ryton® XE4050BL

Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color

Ryton® XE4500BL

Ryton® XE5030BL

30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color

Ryton® XE5430BL

Ryton® XE5430NA

Ryton® XE5500BL

Ryton® XE5515BL

15% glass filled ? PPS allow for blow molding and extrusion processes; black color

Blow Molding;?Extrusion

Ryton® XK2340

40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color

Injection ? Molding

Ryton® R-7-120BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-120NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability; natural color	Injection ? Molding
Ryton® R-7-121BL	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; black color	Injection ? Molding
Ryton® R-7-121NA	Glass/mineral ? filled with 220°C / 240°C UL RTI, arc resistance, lower cost, dimensional ? stability with good flow; natural color	Injection ? Molding
Ryton® R-7-150BL
Ryton® R-7-190BL
Ryton® R-7-190NA
Ryton® R-7-220BL	Glass/mineral ? filled hydrolytic stable, creep resistant, high modulus, dimensional ? stability; black color	Injection ? Molding
Ryton® R-7-232BL	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® R-7-232NA	Glass/mineral ? filled, high temperature and hydrolysis resistance, FDA & EU-Food ? approved	Injection ? Molding
Ryton® V-1	Low viscosity ? PPS polymer for coatings and compression molding	Coating;?Compounding;?Extrusion;?Extrusion ? Coating
Ryton® XE3500BL
Ryton® XE4050BL	Glass/mineral ? filled PPS alloy with high impact strength and good thermal stability; black ? color
Ryton® XE4500BL
Ryton® XE5030BL	30% glass filled ? PPS alloy with high impact strength, high flow and good thermal stability; ? black color
Ryton® XE5430BL
Ryton® XE5430NA
Ryton® XE5500BL
Ryton® XE5515BL	15% glass filled ? PPS allow for blow molding and extrusion processes; black color	Blow Molding;?Extrusion
Ryton® XK2340	40% glass filled ? PPS alloy with high strength, exceptionally high flow and precision molding; ? black color	Injection ? Molding